Study guides, Class notes & Summaries

CBSPD Final Exam 2023-2024 LATEST QUESTIONS AND ANSWERS VERIFIED

which of the following is an example of surgical asepsis? - ANSWER Sterilization of instruments. whenever there are major changes made to packaging, such as switching the type of packaging material or containers used, what should always be done? - ANSWER Product testing should always be performed. The method for testing different types of detergents to find out if one performs better or more effectively than another is? - ANSWER Validation Testing

The need for frequent reprocessing can be minimized by: - ANSWER Proper stock rotation Which of the following best describes a minimum exposure time, temperature, and pressure for prevacuum steam sterilization of wrapped items? - ANSWER 4 minutes @ 270 deg F (132 deg C) and 28-30 pounds per square inch What is the most important thing to remember when double -peel-pouching? - ANSWER The inner pouch must lay flat inside the outer pouch

You have received a loaner instrument, w the IFU's. The IFU's state that the instrument is to be sterilized at 273 degrees , for 4 minutes. You usually run 270 degrees for 4 minutes. What should you do? - ANSWER Call the manufacturer to find out what you can do The set assembly count sheet calls for a Senns, dull. All you have is a Senns, sharp. What kind of behavior is displayed if you put the sharp Senns in and put it in the sterilizer? - ANSWER unethical Why not use sodium hypochlorit...

The main role of the sterile processing area is to - ANSWER provide dependable reliable services to enhance the quality of patient care. Instruments sets and patient care equipment processing and distributing must be done accurately and timely so: - ANSWER patient care is not adversely affected ethics is - ANSWER doing the right thing

CBSPD EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS CBSPD EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS CBSPD EXAM QUESTIONS AND ANSWERS WITH COMPLETE SOLUTIONS 1. What should the sterilizer access area pressure be >>> Negative w/10 air exchanges per hour 2. What two steps are involved in decontamination >>> 1. Manual and/or auto- mated mechanical cleaning 2. application of a thermal or chemical disinfection process 3. Define Cleaning.. >>> Th...

If the steam pressure is too low for the set temperature Superheating can occur Wet steam can cause Wet packs AAMI recommends that the temperature in the sterilization area be: 68-73 degrees AAMI recommends that the humidity is the sterilization area be 30%-60% The recommended ventilation in the sterilization are is—— air exchanges per hour under positive pressure 10 AAMI recommends that the temperature in the sterilizer access area be —- with — air exchanges per hour and under — ...

Chemical indicators that are used to test the humidity, temperature, sterilant or a variety of parameters of the sterilization process are called? Chemical Integrators. There are four primary objectives for all packaging materials. Each of the following is one of them EXCEPT? They must not allow penetration of the chosen sterilant and must be compatible with any other requirements of the sterilization process. Lighting in the decontamination area should be adequate for detailed cleaning and in...

According to AAMI, "The removal of contamination from an item to the extent necessary for further processing or for the intended use" defines: A. Cleaning B. Sterilization C. Disinfection D. Decontamination A. Cleaning According to OSHA, the use of physical or chemical means to inactivate bloodborne pathogens from a surface is known as: A. Cleaning B. Sterilizing C. Disinfection D. Decontamination D. Decontamination What is the first step in the decontamination process? A. Manual and/or a...

A broken glass suction bottle is returned to Decontamination. Which of the following should the technician do? Place it in an appropriate rigid container Safety Data Sheets (SDS) provide health and safety hazard and risk information on which of the following? Chemical Which of the following generally describes the correct sequence for traffic workflow in areas in which medical devices are processed? Decontamination, Assembly, Packaging, Sterilization, Sterile Storage The MAJOR reason why acry...

Why is it important to evenly distribute large instruments in a set? A. Extra condensation will make the set more difficult to dry B. It came help with storage C. Easier to carry D. None of the above A. Extra condensation will make the set more difficult to dry Which of the following best describe the overall role of the CB/SPD A. To help Nurse prepare for patients B. To provide dependable service to enhance patient care C. Specialized portable devices D. None of the above B. To provide dependa...